Follow these easy steps to get your Zanussi ZRB 2825 W Refrigerator up and running in no time.
Before using the refrigerator, remove all securing tapes used during transportation.
Wash the inside of the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger.
The back of the cabinet may be placed close to the wall but must not touch it. Ensure the appliance is not located close to cookers, radiators, or boilers, and avoid prolonged exposure to direct sunlight.
Ensure there is adequate ventilation around the appliance. Do not install in places with restricted ventilation.
Adjust the level of the appliance by screwing out the adjustable foot or feet at the bottom of the cabinet using your fingers or a tool.
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
After installation, leave the appliance for 2 hours before turning it on to allow the refrigerant to settle.
The temperature inside the refrigerator is regulated by a thermostat with 6 positions and an 'OFF' position. Turn the thermostat dial to the required position. The intermediate position (3-4) is usually the most suitable.
Ensure the appliance is correctly installed and that the door gasket adheres properly to the cabinet.